, Separation

Application: Separation

Applications:

  • Filtration/Hydrocyclones/Packed Beds
  • Research/Process Monitoring
  • Separation Process
  • Research/Process Monitoring and Development

Benefits include:

  • Shorten Cycle times by measuring process and points
  • Increase yield by measuring phase concentration and boundaries
  • Develop new techniques

 

Right Click to zoom

This shows the conductivity distribution through the filter cake of an industrial pressure filter as it dries over time. It can be seen that the cake dries preferentially in the centre as the image becomes blue indicating low conductivity.

How Tomography can help

Tomography has been used in a variety of separation processes to identify the changing concentration of two phases as a function of space and time.

Hydrocyclones

In the case of hydrocyclones, the air core of the cyclone has been identified and its diameter measured within a few millimeters. This correlates closely with the performance of the unit and the wear of the spigot.


HydrocycloneAir CoreHydrocyclone Sensor
Air core size measurement - accuracy to below 1%

 

Pressure Filtration

In the case of pressure filtration, a tomographic sensor has been used to observe the drying cycle with the objective of reducing time and improving the quality of the process.

Pressure filter schematic

Pressure filter schematic

 

Pressure filter drying curve
Pressure filter drying curve


Packed column

Packed Column

The flow profile of a brine pulse through packed columns such as those used in chromatography can be measured as a mean of evaluating packing and the effectiveness of distributors.

 


Right Click to zoom

The example above shows the tomographic images when a high conductivity tracer was added to the inlet feed of a radial flow reactor. This and similar experiments were used to determine the flow and velocity distribution within the reactor.

Interface Detection

ITS has developed a probe for detecting interfaces, in particular liquid / foam and slurry / liquid interfaces. The probe is able to detect the rate at which solids settle and position of the boundary.

Interface detection from settling sludge simulate preparation
Interface detection from settling sludge simulate preparation

« Home

LATEST NEWS

ITS will be at the APACT10 in Manchester, UK
ITS will be at the Advances in Process Analytics and Control Technologies Conference in Manchester.
Read the articleRead the article

ITS article featured on PETRO Industry News
An Oil Company Used Dual-modality ECT and ERT to Study the Flow of Multiphase Oil-water-gas Systems Reducing Energy Costs and Improving Plant Yields.
Read the articleRead the article

RSSSubscribe to our feed